Lexicon 480L Quick Reference Manual

1. Choosing a Configuration
In the Single configuration,
the 480L runs one program.
In the Cascade, Stereo Split,
and Mono Split configura-
tions, it can run two programs
simultaneously.
2. Loading a Program
Use BANK to select the bank
that contains the program
you want. Press BANK re-
peatedly to scroll through all
the banks, or press BANK
and a numeric key to go di-
rectly to the bank you want.
3. Editing Parameters
After loading a program, you
can edit its parameters with
the LARC's sliders.
4. Storing Edited Programs in Registers
The 480L stores five banks
(1-5) of ten user-program-
mable registers in internal
memory. Another five banks
(6-10) of ten registers can be
stored in a cartridge
plugged into the front panel
of the 480L.
5. Loading a Register
Press REG to switch from
program to register mode.
Lexicon Part # 070-09361 Rev 1
To choose a configuration,
press CTRL to enter the con-
trol mode.
Inputs
L R
Machine Machine
A
L
L R
Main Outputs
Main Outputs
Single Configuration
Mono Split Configuration
Press PGM and the number
of the program you want to
load into machine A.
Example: To load program 5.6, Rebound, press
select the Effects bank. Then press
A code appears in the dis-
play window above each
slider. To display the com-
plete title in the main display,
move the slider, or press the
key directly below the slider.
To store an edited version of
a program in a register,
press REG once to enter the
register mode. Press
repeatedly to locate the bank
you want to store the register
in.
Use BANK to select the bank
that contains the register
you want. Press BANK
peatedly to scroll through all
the banks, or press
and one of the numeric keys.
This completes the basic introduction to the Lexicon 480L. For
detailed explanations of the many features and capabilities
not described here, read the 480L Owner's Manual.
3 Oak Park • Bedford MA 01730-1441 USA • Telephone: 617-280-0300 • Fax: 617-280-0490
480L Quick Reference Guide
Use slider 2 on page 1 to
choose one of the four con-
figurations shown below.
Inputs
L R
Machine
Machine
A B
L
R L R
Main Outputs
Aux Outputs
Stereo Split Configuration
If you set up the 480L with a
Split or Cascade configura-
tion, you can load a second
program into machine B.
BANK 5
PGM 6 to load the program.
Most programs have several
pages of parameters. Press
PAGE to step through the
pages. Press PAGE
numeric key to go directly to
the page you want.
Press REG repeatedly to
locate an "Unused" register,
or any register you don't
BANK
mind erasing. Hold down
STO and press
same time. The register is
now stored.
Press REG repeatedly to find
the register you want to load.
re- Press the number of the reg-
ister you want to load into
BANK machine A.
Press CTRL
control mode.
Inputs
Inputs
L R
L
Machine
Machine
A B
R L R Machine
Aux Outputs
L
Main Outputs
Cascade Configuration
Press MACH
LARC control to machine B.
Now use BANK
the numeric keys to load a
program. Switch control be-
tween machine A and B at
to
any time by pressing MACH.
and a
REG at the
If you set up the 480L with a
Split or Cascade configura-
tion, you can load a second
program or register into ma-
chine B.
again to exit the
R
A
B
R R L
Aux Outputs
to switch
, PGM , and
The LARC