Installing and Replacing Optional Cards
The Add Slot-based interface window opens.
3. From the drop-down lists:
a. Select the card to add or remove:
b. Select the slot number:
4. Click OK.
When the card and slot are identified, VPN Manager automatically generates
and names the corresponding new interfaces. For example, eth-sxpz, where x
is the slot number and z is the port number on the card. For the fiber optic and
copper Gigabit Ethernet cards, this might be slot 1 or 2 and port 1 or 2. For the
four-port 10/100 Ethernet card, this might show slot 1 or 2 and port 1, 2, 3, or
4. VPN Manager then places the new interfaces on the VPN Manager user
interface and you can configure them the same as any other Ethernet interface.
1000BaseTX (Copper) 2 ports
1000BaseTX (Fiber) 2 ports
four-port 10/100 Ethernet 4 ports
Choose Slot 1
Choose Slot 2
Nokia 100i Installation Guide