Table of Contents
Advertisement
2. Loosen the two front-panel retaining screws.
3. Completely remove the slide tray assembly from the chassis assembly to
4. Locate the 33-MHz PMC connectors on the rear of the motherboard.
Nokia 100i Installation Guide
Chassis assembly retaining screws
expose the motherboard components.
Note
Make sure you locate the correct connectors for the Nokia Encryption
Accelerator Card. Do not use the PMC connectors located at the front
of the motherboard; those connectors are for network interface cards.
Installing an Encryption Accelerator Card
00248a
00
43
Advertisement
Table of Contents
