Preparing The Installation Environment; Ventilation - Nokia 100i - IP VPN - Gateway Installation Manual

Installation guide
Table of Contents

Advertisement

The following section describes environmental and safety precautions for the
gateway, including:
!
!
!
!

Preparing the Installation Environment

Before you install the gateway, make sure that the installation environment is
clean, dry, and dust free. Take the following precautions to maintain a safe
working environment and to avoid accidents:
!
!
!

Ventilation

Gateways can generate substantial heat during operation and therefore require
adequate ventilation. You might need to install the gateway in an air-
conditioned room to ensure that its internal cooling system can maintain
acceptable temperatures during operation.
Warning
Do not block any ventilation slots on the gateway. Internal components
might overheat and be damaged.
Nokia 100i Installation Guide
Preparing the Installation Environment
Safety Precautions
Electrical Power Source
Product Disposal
Inspect the area for hazards, such as bare wires and standing water.
Remove scarves and neckties, jewelry, and other loose items before you
install the gateway.
Do not remove the gateway cover under any circumstances.
Preparing the Installation Environment
17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 100i - IP VPN - Gateway and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

100i

Table of Contents