Motorola 5440AP - Canopy 5.4 GHz AP User Manual Supplement page 27

Canopy 400 Series OFDM AP and SM
Procedure 2: Assembling the AP, and attaching to tower
1. Perform a parts check to ensure all
parts are present.
2. Assemble the upper bracket, per the
diagram that comes with the
antenna.
3. Connect the radio to the antenna by
sliding it into the captive space.
Secure the radio to the antenna
using the two bolts provided.
4. Assemble the lower bracket on the
antenna assembly.
Although it may seem intuitive to
attach both brackets to the tower or
pole and then hang the antenna, it
usually works better to have the
bottom bracket already attached to
the antenna before climbing.
5. Weatherproof the connector using
standard practices, with waterproof
wrap.
Version 1, April 2008
User Guide
Page 27 of 40