Motorola 5440AP - Canopy 5.4 GHz AP User Manual Supplement page 35

Canopy 400 Series OFDM AP and SM
The relevant Declaration of Conformity can be found at http://www.canopywireless.com/doc.php.
6.2.6 Luxembourg Notification
5.4GHz products can only be used for mobile services.
6.2.7 Czech Republic Notification
5.4 GHz products can be operated in accordance with the Czech General License
No. GL-30/R/2000.
6.2.8 Greece Notification
The outdoor use of 5470-5725MHz is under license of EETT but is being harmonized according
to the CEPT Decision ECC/DEC/(04) 08, of 9
to determine the latest position and obtain any appropriate licenses.
6.2.9 Brazil Notification
Brazil regulatory authorities have not approved these devices for operation in Brazil. Until
they are approved, they are not available for sale in Brazil, and the information in this
section is provisional and preliminary.
For compliant operation in the 5.4 GHz band, the Equivalent Isotropic Radiated Power from the
integrated antenna or connectorized anteanna shall not exceed 27 dBm (0.5 W).
The operator is responsible for enabling the DFS feature on any Canopy 5.4 GHz radio by setting
the Region Code to "Brazil", including after the module is reset to factory defaults.
Important Note: This equipment operates as a secondary application, so it has no rights against
harmful interference, even if generated by similar equipment, and cannot cause harmful
interference on systems operating as primary applications.
6.2.10 Labeling and Disclosure Table for China
The People's Republic of China requires that Motorola's products comply with China
Management Methods (CMM) environmental regulations. (China Management Methods refers to
the regulation Management Methods for Controlling Pollution by Electronic Information Products.)
Two items are used to demonstrate compliance; the label and the disclosure table.
The label is placed in a customer visible position on the product.
Logo 1 means that the product contains no substances in excess of the maximum
•
concentration value for materials identified in the China Management Methods
regulation.
Logo 2 means that the product may contain substances in excess of the maximum
•
concentration value for materials identified in the China Management Methods
regulation, and has an Environmental Friendly Use Period (EFUP) in years, fifty
years in the example shown.
Logo 1
The Environmental Friendly Use Period (EFUP) is the period (in years) during which the Toxic
and Hazardous Substances (T&HS) contained in the Electronic Information Product (EIP) will not
leak or mutate causing environmental pollution or bodily injury from the use of the EIP. The EFUP
indicated by the Logo 2 label applies to a product and all its parts. Certain field-replaceable parts,
such as battery modules, can have a different EFUP and are marked separately.
Version 1, April 2008
th
July. End users are advised to contact the EETT
Logo 2
User Guide
Page 35 of 40