Switch the image.
Decrease screen brightness.
Increase screen brightness.
Mute device sound.
Decrease device sound.
Increase device sound.
To use a hotkey command on the device keyboard, follow either of these steps:
Briefly press the
– or –
Press and hold down the
release both keys at the same time.
Initiating Standby (fn+f1)
When Standby is initiated, your information is stored in memory, the screen is cleared, and power is
conserved. While the device is in Standby, the power light blinks.
key, and then briefly press the second key of the hotkey command.
key, briefly press the second key of the hotkey command, and then
to initiate Standby.
Using the keyboard