Initiating Standby (Fn+F1) - HP Mini 1000 User Manual

Function
Initiate Standby.
Switch the image.
Decrease screen brightness.
Increase screen brightness.
Initiate QuickLock.
Mute or restore speaker.
Decrease speaker sound.
Increase speaker sound.
To use a hotkey command on the device keyboard, follow either of these steps:
●
Briefly press the
– or –
●
Press and hold down the
release both keys at the same time.

Initiating Standby (fn+f1)

Press fn+f1
When Standby is initiated, your information is stored in memory, the screen is cleared, and power is
conserved. While the device is in Standby, the power light blinks.
fn key, and then briefly press the second key of the hotkey command.
fn key, briefly press the second key of the hotkey command, and then
to initiate Standby.
Hotkey
fn+f1
fn+f2
fn+f3
fn+f4
fn+f6
fn+f8
fn+f10
fn+f11
Using the keyboard 55