Initiating Standby (Fn+F3); Switching Display And Image (Fn+F4) - HP compaq Hardware Manual

Initiating Standby (Fn+F3)

The
Fn+F3
■
When the notebook is on, press the
Standby. When Standby is initiated, your work is saved in
random access memory (RAM), the screen is cleared, and
power is conserved. While the notebook is in Standby, the
power/Standby light blinks.
■
To exit Standby, briefly press the power button.
The function of the
Windows, can be changed. For example, the
set to initiate Hibernation instead of Standby. For more
information about Standby, Hibernation, and changing the
function of the
Software Guide, "Power" section.

Switching Display and Image (Fn+F4)

The
Fn+F4
external display device connected to the notebook. Pressing
switches the image among the notebook display, the external
display device, and a simultaneous display on the notebook and
the external device.
The following video transmission types are supported by the
Fn+F4
■
LCD (notebook display)
■
External VGA (most external monitors and projectors)
■
S-Video (televisions, camcorders, VCRs, and video capture
cards with S-Video in jacks)
Hardware Guide
hotkeys are set at the factory to initiate Standby.
Fn+F3
Fn+F3
hotkeys switch the image between the display and an
hotkeys:
hotkeys, called the "sleep button" in
hotkeys, refer on this CD to the
Pointing Devices and Keyboard
hotkeys to initiate
Fn+F3
hotkeys can be
Fn+F3
Fn+F4
2–7