Lexicon CORE2 User Manual page 13

Lexicon Studio Core2 User Guide
8. Windows will ask if you want to search for the driver. Select Yes (Recommended).
9. Windows will search the drive from which a driver was last loaded. If you installed drivers from
floppy disk, it will check only the floppy drive. If you have loaded the updated drivers from different
media, you will need to click the Other Locations... button and Browse to the CD-ROM for the
new driver. If you encounter problems locating the first file, check to make sure the path is correct,
then click OK.
10. Click the Finish button.
11. Windows will prompt you to restart. Select No when prompted and continue with these
instructions.
Reinstall Setup.exe
1. Insert the "Lexicon Studio Core2: Drivers & Documentation" CD-ROM if you haven't already.
2. Open the contents of the CD-ROM and double-click on Setup.exe to launch the Installer.
3. Click Next > at the Installer welcome screen.
4. At the summary screen, select the desired software and click Next > to choose it.
5. Click Next > to begin the installation.
6. Click Finish to complete the installation.
7. Cold boot your computer (even if you've already restarted after installing the Core2 Drivers).
Installation
9
9