Updating Drivers - Lexicon CORE2 User Manual

Lexicon Studio Core2 User Guide Installation
Running the Setup.exe Program
1. Insert the "Lexicon Studio Core2: Drivers & Documentation" CD-ROM if you haven't already.
2. Open the contents of the CD-ROM and double-click on Setup.exe to launch the Installer.
3. Click Next > at the Installer welcome screen.
4. At the summary screen, select the desired software and click Next > to choose it.
5. Click Next > to begin the installation.
6. Click Finish to complete the installation.
7. Cold boot your computer (even if you've already restarted after installing the Core2 Drivers).
To remove or update this software, remove the install by using the Add/Remove Programs control
panel, highlighting file, and selecting Remove. This control panel is located at Start/Settings/Control
Panel/Add/Remove Programs.

Updating Drivers

If you are installing a newer version of Lexicon Studio software over your current software, follow the
steps outlined below.
Remove the Old Software
As Lexicon Studio software is registered through the Windows Add/Remove Programs control panel,
it must be completely removed to install a newer version. You should never have 2 different versions
of the software installed simultaneously.
1. Go to Start/Settings/Control Panel /Add/Remove Programs.
2. Scroll down to Lexicon Core2.
3. Click the Add/Remove button.
4. Click the Yes button when asked "Are you sure you want to completely remove Lexicon Core2
and all of its components?".
7
7