Advertisement
F
P
POWER ( O/I ) Switch
This is the main power switch for the repeater.
Power Indicator ( MAIN )
This LED glows green when the main power source
is used.
Power Indicator ( BACKUP )
This LED glows red when the backup power source
is used.
MIC Jack
Connect the microphone plug to this jack. This jack
is also used for writing and reading channel fre-
quency or other configurations via the COM Port of
the PC on which the clone editor (CE60) is running.
Programmable Function ( PF ) Key
Six pushbuttons on the front panel are program-
mable function (PF) keys, each with an orange in-
dicator inside. Each key can be programmed with
two functions, one for a "long" press and one for a
"momentary" press. The PF key functions may be
customized, via programming by your VERTEX
STANDARD dealer, to meet your communications
network requirements. Note that some functions
may require the purchase of optional internal ac-
cessories. The possible PF key features and func-
tions are explained on the pages to follow.
VOL Knob
This control knob adjusts the output level of the
front speaker and external speaker jack on the back
panel.
2
C
& C
TX Indicator
This LED glows red when the repeater is transmit-
ting.
Numeric Display
This display consists of two 7-segment LEDs, indi-
cating the channel number during normal opera-
tion. If an abnormal condition arises, an error code
will be displayed:
D
-
,
,
,
BUSY Indicator
This LED glows green when the receiving channel
is busy.
Speaker
The internal speaker is located here.
VXR-9000 FM R
D
Channel Number
Clone Active
PLL Unlock
High temperature in PA Unit
Scan Active
Front Panel Keys are Locked
PTT key is Disabled
Cooling Fan is Disabled
Low Voltage in Backup Battery
PA Unit Abnormality
Contact your Dealer
O
M
Advertisement
