Table of Contents
Advertisement
The FTM-10SR has a 24-hour clock (accuracy: ±30 sec/month).
With the Clock/Timer, you may operate the following features:
Clock feature: Display the current time.
Stop Watch Timer feature.
1. Press and hold the [ VOL/SEL ] key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item "F9 CLOCK".
3. Press the
key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select "ON".
5. Press the [ VOL/SEL ] key to save the new setting and exit
to normal operation.
6. Press the [ VOL/SEL ] key repeatedly to display the Clock,
Stop Watch Timer, or Thermometer.
7. Rotate the DIAL knob to select the Clock.
When the Clock is displayed in above step, this step is unnecessary
8. Press and hold the [ VOL/SEL ] key for one second to activate the Clock/Timer
Customization mode.
9. Rotate the DIAL knob to select Menu Item "T1 TIME ADJ."
10. Press the
key to display the current time.
11. Press and hold the
umn blinking. Rotate the DIAL knob to set the exact cur-
rent hour.
12. Press the
key to move the blinking column to "minute".
Rotate the DIAL knob to set the exact current minute.
13. Press the
key to save the new setting.
When the
key is pressed in accordance with the time
signal from a radio station etc, the FTM-10SR's clock may
be set more precisely.
14. Press the [ VOL/SEL ] key to exit to normal operation.
FTM-10SR O
PERATING
C
LOCK
S
ET UP THE
key. You will notice the "hour" col-
M
ANUAL
/T
O
IMER
C
LOCK
PERATION
53
Advertisement
Table of Contents
