Time System; Alarm Set; Interval Beep - Yaesu FTM-10SR Operating Manual

Vhf/uhf dual band fm transceiver
Hide thumbs Also See for FTM-10SR:
Table of Contents

Advertisement

M
ISCELLANEOUS
You may select the Time System between "12H" and "24H" via the Menu mode.
1. Press the [ VOL/SEL ] key repeatedly to display the Clock, Stop Watch Timer, or Ther-
mometer.
The display returns to the frequency display automatically if you leave an interval of
approximately three seconds before the next operation. Please operate the next step
within the 3 second interval.
2. Press and hold the [ VOL/SEL ] key for one second.
3. Rotate the DIAL knob to select the Menu Item "T4 12H/24H".
4. Press the
key momentarily. Then rotate the DIAL knob to select the desired Time
System.
5. Press the [ VOL/SEL ] key to save the new setting and exit to normal operation.
You may set an alarm beep which will sound every "00" minutes via the Menu mode.
1. Press the [ VOL/SEL ] key repeatedly to display the Clock, Stop Watch Timer, or Ther-
mometer.
2. Press and hold the [ VOL/SEL ] key for one second.
3. Rotate the DIAL knob to select the Menu Item "T2 CLOCK BP".
key momentarily. Then rotate the DIAL knob to change the setting to
4. Press the
"ON".
5. Press the [ VOL/SEL ] key to save the new setting and exit to normal operation.
To turn the alarm off again, select "OFF" in step 4 above.
The FTM-10SR's Stop Watch Timer allows programming a timed interval when a beep
will sound and the white LED will flash.
1. Press the [ VOL/SEL ] key repeatedly to recall the Clock/Timer mode.
2. Press and hold the [ VOL/SEL ] key for one second to activate the Clock/Timer
Customization mode.
3. Rotate the DIAL knob to select Menu Item "T5 TMR BEEP".
4. Press the
key momentarily to enable selection of this Menu Item.
5. Rotate the DIAL knob to select the desired interval. Available selections are "5MIN"
through "60MIN" (5MIN increment) or "OFF".
6. Now, press the [ VOL/SEL ] key to save the new setting and exit to Clock/Timer mode.
To disable the interval timer, just repeat the above procedure, rotating the DIAL knob to
select "OFF" in step 5 above.
84
S
ETTING
T
S
IME
YSTEM
A
S
LARM
ET
I
B
NTERVAL
EEP
FTM-10SR O
M
PERATING
ANUAL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ftm-10

Table of Contents