Yaesu FTM-10SR Operating Manual page 98

( "S
M
ENU
Set Mode Item [F24 RPT ARS
F24 RPT ARS F24 RPT ARS] F24 RPT ARS
F24 RPT ARS
Function: Enables/Disables the Automatic Repeater Shift function.
Available Values: ON/OFF
Default: ON
Set Mode Item [F25 RPT MODE
F25 RPT MODE F25 RPT MODE] F25 RPT MODE
F25 RPT MODE
Function: Sets the Repeater Shift Direction.
Available Values: RPTR OFF/RPTR -/RPTR +
Default: Depends on the transceiver version, as well as the setting of Menu Item [F24
RPT ARS].
Set Mode Item [F26 RPT SFT
F26 RPT SFT F26 RPT SFT F26 RPT SFT] F26 RPT SFT
Function: Sets the magnitude of the repeater Shift.
Available Values: 0.00 - 99.95 MHz (50 kHz increments)
Default: Depends on the operating band and transceiver version.
Set Mode Item [F27 RX EXP
F27 RX EXP F27 RX EXP F27 RX EXP] F27 RX EXP
Function: Enables/Disables the band expansion.
Available Values: NORMAL/EXPAND
Default: NORMAL
When this Set Mode Item is set to "EXPAND", you will receive the following additional
bands.
108 - 137 MHz
174 - 200 MHz
Set Mode Item [F28 RX F CCL
F28 RX F CCL F28 RX F CCL
F28 RX F CCL] F28 RX F CCL
Function: Shifting of the CPU clock frequency.
Available Values: OFF/ON
Default: OFF
This function is only used to move a spurious response "birdie", should it fall on a desired
frequency.
Set Mode Item [F29 RX M MOD
F29 RX M MOD F29 RX M MOD
F29 RX M MOD] F29 RX M MOD
Function: Selects the receiving mode.
Available Values: AUTO/WIDE FM/FMNARR FM/AM
Default: AUTO
96
" ) M
ET
300 - 336 MHz
336 - 420 MHz
ODE
470 - 800 MHz
800 - 999.9875 MHz (cellular blocked)
FTM-10SR O M
PERATING ANUAL