Table of Contents
Advertisement
Set Mode Item [ F3 AF PITCH
F3 AF PITCH ]
F3 AF PITCH
F3 AF PITCH
F3 AF PITCH
Function: Select the Tone Pitch control for the received audio.
Available Values: LOW-3/LOW-2/LOW-1/NORMAL/HIGH-1/HIGH-2
Default: NORMAL
Set Mode Item [ F4 AF PREST
F4 AF PREST ]
F4 AF PREST
F4 AF PREST
F4 AF PREST
Function: Enable/Disable the Volume Setting Alert feature.
Available Values: OFF/OV ALERT/LV ALERT/ HV ALERT
Default: OFF
OV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knob
blinks orange when volume level is set to the ±3 steps of the preset level.
LV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knob
blinks orange when volume level is set to the preset level minus 3 steps.
HV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knob
blinks orange when volume level is set to the preset level plus 3 steps above.
Disables the Volume Setting Alert feature.
OFF:
Set Mode Item [ F5 AF-VFO
F5 AF-VFO ]
F5 AF-VFO
F5 AF-VFO
F5 AF-VFO
Function: Select the DIAL knob and display function.
Available Values: TOGGLE/AUTOBACK
Default: AUTOBACK
Keeps the DIAL knob function and display until the [ VOL/SEL ] key is pressed
TOGGLE:
once again.
AUTOBACK: The DIAL knob function and display comes back to frequency selection and
frequency display after approximately 3 seconds.
Set Mode Item [ F6 BEEP
F6 BEEP ]
F6 BEEP
F6 BEEP
F6 BEEP
Function: Enables/Disables the beeper.
Available Values: KEY+SC/KEY/OFF
Default: KEY+SC
KEY+SC: The beeper sounds when you press any key, or when the scanner stops.
The beeper sounds when you press any key.
KEY:
Beeper is disabled.
OFF:
Set Mode Item [ F7 BLU SAVE
F7 BLU SAVE ]
F7 BLU SAVE
F7 BLU SAVE
F7 BLU SAVE
Function: Enable/Disable the battery saver of the optional BH-1 Bluetooth
Available Values: OFF/ON
Default: OFF
FTM-10SR O
PERATING
M
ENU
M
ANUAL
( "S
" ) M
ET
ODE
Headset.
®
93
Advertisement
Table of Contents
