(U.s. Version Only) - Yaesu FT-950 Operating Manual

B O
ASIC PERATION
O
PERATION ON
The FT-950 includes the capability for transmission and reception on the five spot frequencies assigned to the Amateur
Service in the United States. To operate on the 5 MHz band:
1. Press the [ V/M ] button once to enter the "Memory"
mode; the " " icon will appear in the display and a
memory channel number will appear on the Multi-Dis-
play Window in the display.
A :
DVICE
If you can not enter the "Memory" mode, check to see
if the transceiver is in VFO-B mode (the green [( VFO-
B ) RX ] Indicator/Switch is illuminated). If so, press the
[( VFO-A ) RX ] Indicator/Switch to return operation to
VFO-A. Now, press the [ V/M ] button to enter the
"Memory" mode.
2. Press the [ MCH ] button located on the bottom right of
the [ CLAR/VFO-B ] knob. The LED imbedded in the
button will glow orange to signify that rotation of the
[ CLAR/VFO-B ] knob will allow selection of the
memory channel.
3. Memory channels "US1 US1" through "US5
US1 US1
US1
grammed, at the factory, with the permitted frequen-
cies in the 5 MHz band, and the USB mode is auto-
matically selected on these channels.
4. To exit from 60-meter operation and return to the VFO
mode, just press the [ V/M ] button.
N :
OTE
The frequencies and operating mode for 5 MHz band op-
eration are fixed, and may not be changed.
Page 32
:
R
ECEIVING ON
( 5 MH
60-M
ETER
US5" are pre-pro-
US5 US5
US5
A
MATEUR
) B
AND ( U.S.
Z
VERSION ONLY
[ VFO-A ( RX )] Button
Main Tuning Dial Knob
FT-950 O
B
ANDS
)
[ CLAR/VFO-B ] Knob
[ VFO-B ( RX )] Button
[ V/M ] Button [ MCH ] Button
M
PERATING ANUAL