Yaesu FT-950 Operating Manual page 85

C M
ONTEST
M M P
ESSAGE EMORY ROGRAMMING
1. Set the operating mode to CW.
2. Set the [ BK-IN ] button to "Off".
3. Turn the internal Electronic Keyer "On" by pressing
the [ KEYER ] button, if necessary.
4. Press the [ MEM ] key on the FH-2. A blinking "
icon will appear in the display.
5. Press any of the FH-2's keys numbered [ 1 ] through
[ 5 ] to begin the memory storage process, and the
" " icon will glow steadily.
6. Send the desired message using your keyer paddle.
A :
DVICE
If you do not start keying within ten seconds, the
memory storage process will be cancelled.
7. Press the [ MEM ] key on the FH-2 once more at the
end of your message. Up to 50 characters may be stored
in each of the five memories.
N :
OTE
You must exercise care in sending to ensure that the spaces
between letters and words are accurately done; if your tim-
ing is off, the spacing may not come out right in the stored
message. For ease in setting up the keyer memories, we
recommend you set Menu item "037 A1A F-TYPE
or "039 A1A R-TYPE 039 A1A R-TYPE" to "ACS
039 A1A R-TYPE 039 A1A R-TYPE 039 A1A R-TYPE
Spacing) while you are programming the keyer memories.
FT-950 O
PERATING
CW C
K
EYER ( U
EMORY
SING THE OPTIONAL
( U
P
SING YOUR ADDLE
LOCK
ON OFF
LOCK
ON OFF
LOCK
ON OFF
037 A1A F-TYPE" and/
037 A1A F-TYPE 037 A1A F-TYPE 037 A1A F-TYPE
ACS" (Automatic Character
ACS ACS ACS
M
ANUAL
ONVENIENCE
FH-2 R
)
C CW M
HECKING THE
1. Be sure that Break-in is still turned "Off" by the
[ BK-IN ] button.
2. Press the [ MONI ] button to enable the CW monitor. A
" " icon will appear in the display.
3. Press the FH-2's [ 1 ] ~ [ 5 ] key whichever one you just
"
recorded in. You will hear the results in the sidetone
monitor, but no RF energy will be transmitted.
N :
OTE
You may adjust the monitor level using the [ MONI ] knob.
O -T -A CW M
N HE IR
1. Press the [ BK-IN ] button to enable transmission. Ei-
ther Full- or Semi-break-in will be engaged, depend-
ing on the setting of Menu item "043 A1A BK-IN
2. Press the FH-2's [ 1 ] ~ [ 5 ] key, depending on which
CW Memory Register's message you wish to transmit.
The programmed message will be transmitted on the
air.
N :
OTE
If you subsequently decide to use the "Text Memory" tech-
nique for memory storage, please note that a message stored
using keyer paddle input will not be transferred over when
you select "Text Memory technique" on a particular
memory register (the Menu Mode Setting is set to "tyP1
F
EATURES
C K
EMOTE ONTROL EYPAD
C
EMORY ONTENTS
LOCK
ON OFF
P
ESSAGE LAYBACK
043 A1A BK-IN 043 A1A BK-IN
043 A1A BK-IN 043 A1A BK-IN".
LOCK
ON OFF
Page 83
)
tyP1"). tyP1 tyP1 tyP1