Yaesu FT-950 Operating Manual page 127

I
NSTALLATION OF
Interconnections to FT-950
Connect the DMU-2000 and FT-950 transceiver, your after market Display, and your after market Keyboard (if used) as
shown in Figure 5.
N :
OTICE
Keep an inch (2.5 cm) of space on either side of the DMU-2000 to prevent overheating.
ANT
1 2
INPUT: DC 13.8 V
-TUNE
TO FROM ROT TUNER
LINEAR
GND
Operation
The operation of the DMU-2000 is described in the Op-
eration Manual supplied with the DMU-2000.
However, the arrangement of the function keys is different
than the FT-2000. The FT-950 [ BAND ] buttons are used
for the DMU-2000 operations instead of Function But-
tons. Press and hold the FT-950 [ ENT ( DISPLAY )] but-
ton for one second, the FT-950's [ BAND ] buttons will
act as "function" keys for the DMU-2000. Please see the
DMU-2000 Operation Manual for operating details.
FT-950 O
PERATING
D M
ATA ANAGEMENT
DC IN
DC IN
22 A
EXT
REC SPKR
PTT REM KEY
Remove the rubber cap first,
and then connect the plug.
M
ANUAL
O
PTIONAL
( DMU-2000 )
U
NIT
-TUNE DMU CAT
More than one inch
Supplied Connection Cable
A
CCESSORIES
KEYBOARD
MONITOR
[ BAND ] Buttons
Page 125