My Bands" Operation - Yaesu FT-950 Operating Manual

C
ONVENIENCE
When operating on an Amateur Band, it is possible to use the [ BAND ] button to engage the [ CLAR/VFO-B ] knob for
Amateur band selection. The "My Bands" feature allows you to skip some Amateur bands, and make only your preferred
bands available for selection via the [ CLAR/VFO-B ] knob.
This feature can be very useful in a contest, where the 10/18/24 MHz bands are not used, or if you do not have antennas for
some bands.
"My Bands" Setup
1. Press the [ MENU ] button to engage the Menu mode.
2. Rotate the [ SELECT ] knob to select Menu item "090
TUN MY BAND TUN MY BAND
TUN MY BAND TUN MY BAND". TUN MY BAND
A :
DVICE
Press the [ SELECT ] knob to toggle the Menu item
display between "090 TUN 090 TUN" and "MY BAND
090 TUN 090 TUN 090 TUN
3. Rotate the [ CLAR/VFO-B ] knob to choose a band that
you wish to omit (skip) from the band selection loop
(when using the [ CLAR/VFO-B ] knob for band se-
lection). The available choices are 1.8/3.5/5/7/10/14/
18/21/24/28/50/GE (General Band).
4. Press the [ ENT ] button to set the command to ON.
The "E E E E E " (Enable) notation at the right of the band no-
tation will change to "d d d d d " (disable).
5. Repeat steps 3 and 4 to select/deselect as many bands
as you like.
N :
OTE
The "ON" command sets the selected band to be
skipped. The "OFF" command sets the selected band
to be included in the band selection list. Change the
"d d d d d " notation to "E E E E E " to restore a previously deleted band
to the band selection list.
6. Press and hold in the [ MENU ] button for one second
to lock in the new configuration and exit to normal
operation.
"My Band" Operation
1. Press the [ BAND ] button at the left of the [ CLAR/
VFO-B ] knob; the imbedded LED will glow orange.
2. Rotate the [ CLAR/VFO-B ] knob to choose the Ama-
teur band on which you wish to operate. Only those
Amateur bands that have not been set to "skip" will
appear as you scroll through the bands.
To disable the "My Band" Operation, press the [ BAND ]
button again; the imbedded orange LED goes out.
A :
DVICE
The "My Band" feature affects both the VFO-A and VFO-
B.
Page 36
F
EATURES
"MY B " O
ANDS
090 090
090 090
MY BAND". MY BAND MY BAND MY BAND
A
The "My Band" feature affects both the VFO-A and VFO-
B.
1.8 MHz
3.5 MHz
5 MHz
7 MHz
10 MHz
14 MHz
18 MHz
21 MHz
24 MHz
28 MHz
50 MHz
PERATION
[ SELECT ] Knob
[ MENU ] Button
:
DVICE
[ MENU ] Button
3.5 MHz
3.5 MHz
7 MHz
14 MHz
21 MHz
28 MHz
FT-950 O
[ CLAR/VFO-B ] Knob
[ BAND ] Button
[ CLAR/VFO-B ] Knob
14 MHz
7 MHz 21 MHz
28 MHz
M
PERATING ANUAL