Specifications - Yaesu FT-450 Operation Manual

S
PECIFICATIONS
Rx Frequency Range:
Tx Frequency Ranges:
Frequency Stability:
Operating Temperature Range:
Emission Modes:
Frequency Steps:
Antenna Impedance:
Power Consumption:
Supply Voltage:
Dimensions (WxHxD):
Weight (approx.):
Power Output:
Modulation Types:
Maximum FM Deviation:
Harmonic Radiation:
SSB Carrier Suppression:
Undesired Sideband Suppression: At least 60 dB below peak output
Audio Response (SSB):
Microphone Impedance:
Page 98
30 kHz - 56 MHz (operating)
160 - 6 m (specified performance, Amateur bands only)
160 - 6 m (Amateur bands only)
±1 ppm/hour (@77 °F/+25 °C, after warmup)
14 °F ~ 122 °F (–10 °C ~ +50 °C)
A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM)
10 Hz (SSB & CW), 100 Hz (AM & FM)
50 Ohms, unbalanced
Rx (signal present) 1.5 A
Tx (100 W) 22 A
DC 13.8 V ± 10%
9" x 3.3" x 8.5" (229 x 84 x 217 mm)
7.9 lb (3.6 kg)
100 watts (25 watts AM carrier)
J3E (SSB): Balanced,
A3E (AM): Low-Level (Early Stage),
F3E (FM): Variable Reactance
±5.0 kHz / ±2.5 kHz
Better than –60 dB (160 - 10m Amateur bands)
Better than –70 dB (6m Amateur band)
At least 60 dB below peak output
Not more than –6 dB from 400 to 2600 Hz
600 Ohms (200 to 10 kOhms)
FT-450 O M