Beep Tone - Yaesu FT-450 Operation Manual

M
ISCELLANEOUS

Beep Tone

You may adjust the beep tone to your desired tone via the Menu Item "BEEPTON".
1. Press and hold the [ F ] button for one second to
enter the Menu mode. The "
pear on the display.
2. Rotate the [ DSP/SEL ] knob to select the menu
item "EXT MNU".
3. Press the [ DSP/SEL ] knob to enable adjustment
of this menu item. The "
ing.
4. Rotate the [ DSP/SEL ] knob to select "ON" to ex-
pand the menu items.
5. Press the [ DSP/SEL ] knob. The "
turns to appear continuously.
6. Press and hold the [ F ] button for one second to
save the new setting and return to normal opera-
tion.
7. Press and hold the [ F ] button for one second to
enter the Menu mode again. The "
will appear on the display.
8. Rotate the [ DSP/SEL ] knob to select the menu
item "BEEPTON".
9. Press the [ DSP/SEL ] knob to enable adjustment
of this menu item. The "
ing.
10.Rotate the [ DSP/SEL ] knob to select the desired
tone. Available selections are 440/880/1760 Hz,
factory default: 880 Hz). You may press the
[ METER/DIM ] button to sound a beep as you ad-
just the [ DSP/SEL ] knob.
You may press the [ HOME/RCL ] button to reset
the beep tone level to the factory default.
11. Press the [ DSP/SEL ] knob. The "
turns to appear continuously.
12.Press and hold the [ F ] button for one second to
save the new setting and return to normal opera-
tion.
Page 70
S
ETTINGS
B S
EEPER ETTING
" icon will ap-
" icon will be blink-
" icon re-
" icon
" icon will be blink-
" icon re-
[ DSP/SEL ] knob
FT-450 O
[ HOME/RCL ] button
[ F ] button
[ METER/DIM ] button
M