Labeling Memories - Yaesu FT-450 Operation Manual

M O
EMORY

Labeling Memories

You may wish to append an Alphanumeric "Tag" (label) to a memory or memories, to aid in recollection of the
channel's use (such as a club name, etc.). This is easily accomplished using the Menu mode.
1. Press and hold the [ F ] button for one second to
enter the Menu mode. The "
pear on the display.
2. Rotate the [ DSP/SEL ] knob to select the menu
item "EXT MNU".
3. Press the [ DSP/SEL ] knob to enable adjustment
of this menu item. The "
ing.
4. Rotate the [ DSP/SEL ] knob to select "ON" to ex-
pand the menu items.
5. Press the [ DSP/SEL ] knob. The "
turns to appear continuously.
6. Press and hold the [ F ] button for one second to save
the new setting and return to normal operation.
7. Recall the memory channel that you wish to ap-
pend a label.
8. Press and hold the [ F ] button for one second to
enter the Menu mode again. The "
will appear on the display.
9. Rotate the [ DSP/SEL ] knob to select the menu
item "MEM TAG".
10.Press the [ DSP/SEL ] knob to enable adjustment
of this menu item. The "
and "MEM TAG" will be replaced with "TAG-OFF"
11. Press the [F] button to display the previously stored
label (in the factory default, all memory channels
are stored with the memory channel number as
the label).
12.Rotate the [ MAIN DIAL ] knob to select the first
digit of the desired label.
13.Rotate the [ DSP/SEL ] knob one step clockwise
to move to the next character.
14.Repeat steps 12 and 13 to program the remain-
ing letters, numbers, or symbols of the desired
label. Seven characters may be used in the cre-
ation of a label.
15.If you make a mistake, rotate the [ DSP/SEL ] knob
counter-clockwise to move back the cursor, then
re-enter the correct letter, number, or symbol.
You may press the [CLAR] button to clear the cur-
rent digit label.
16.When you have completed the creation of the la-
bel, press the [ DSP/SEL ] knob. The "
returns to appear continuously.
17.Press and hold the [ F ] button for one second to
save the new setting and return to normal opera-
tion.
In Memory mode operation, the display indicates the
channel numbers while selecting the memory chan-
nels, then the display will switch to the Alphanumeric
"Tag" (label) after two seconds.
Page 60
PERATION
R M
EGULAR EMORY
" icon will ap-
" icon will be blink-
" icon re-
" icon
" icon will blink,
" icon
O
PERATION
[ CLAR ] button
[ DSP/SEL ] Knob
[ MAIN DIAL ] Knob
FT-450 O
/
[ MW V/M ] button
[ F ] button
M