My Bands Operation - Yaesu FT-450 Operation Manual

R
ECEIVING
The "My Bands" feature allows you to select several Amateur bands, and make
selection via the [ BAND ] / [ BAND ] buttons.
This feature can be
antennas for some bands.
M B S
Y ANDS ETUP
1. Press and hold the [ F ] button for one second to
enter the Menu mode. The "
pear on the display.
2. Rotate the [ DSP/SEL ] knob to select the menu
item "EXT MNU".
3. Press the [ DSP/SEL ] knob to enable adjustment of
this menu item. The "
4. Rotate the [ DSP/SEL ] knob to select "ON" to ex-
pand the menu items.
5. Press the [ DSP/SEL ] knob to save the new set-
ting. The " " icon returns to appear con-
tinuously.
6. Press and hold the [ F ] button for one second to
return to normal operation.
7. Press and hold the [ F ] button for one second to
enter the Menu mode again. The "
will appear on the display.
8. Rotate the [ DSP/SEL ] knob to select the menu
item "MY BAND".
9. Press the [ DSP/SEL ] knob to enable adjustment of
this menu item. The "
10. Press the [ BAND ] / [ BAND ] buttons to choose
a band you wish to skip (omit) from the band se-
lection loop.
11. Rotate the [ DSP/SEL ] knob to select "OFF", and
then press the [ DSP/SEL ] knob.
N
The "OFF" selection sets the selected band to be
skipped, while the "ON" selection sets the selected
band to be included in the band-selection list.
12. Press the [ DSP/SEL ] knob. The "
turns to appear continuously.
13. Repeat steps 10 through 12 to select/deselect
as many bands as you like.
N
The GEN (General Band) and the current band
cannot be skipped.
14. Press and hold the [ F ] button for one second to save
the new setting and return to normal operation.
M B O
Y ANDS PERATION
Press the [ BAND ] / [ BAND ] buttons to choose the
Amateur band on which you wish to operate. Only
those Amateur bands that have
appear as you scroll through the bands.
Page 22
M B
Y ANDS
useful in a contest, where the 10/18/24 MHz band are not used, or if you do not have
" icon will ap-
" icon will be blinking.
" icon
" icon will be blinking.
" icon re-
been skipped will
O
PERATION
[ DSP/SEL ] knob
1.8MHz
3.5 MHz
7 MHz
10 MHz 3.5 MHz
14 MHz 7 MHz
14 MHz
18 MHz
21 MHz
21 MHz
24 MHz 28 MHz
28 MHz GEN
50 MHz
GEN
FT-450 O
those bands available for
[ BAND ] / [ BAND ] button
[ F ] button
3.5MHz 7MHz 14MHz
« 21MHz GEN
28MHz
BAND BAND
[ BAND ] / [ BAND ] button
M