Config Setting - Yaesu FTDX9000 - DATA MANAGEMENT Operation Manual

L B
OG OOK
Up to five users may be registered into the Logbook. For use in a contest or otherwise, the settings for each
operator may be stored for later recall when that operator signs on. The operator's identification may be en-
tered into the NAME column; both the name and callsign may be entered.
1. Referring to Figure
[ 6/14 ]( CONFIG ) key, then press the [ 1/1.8 ]( ) /
[ 2/3.5 ]( ) keys to utilize the "SELECT USER"
function.
2. When you want to register a new user, or change
the name of an existing user, press the [ 5/
10 ]( NAME EDIT ) key and input the call sign and/
or other information.
3. Press the [ 5/10 ]( NAME EDIT ) key.
4. Press the [ 6/14 ]( CONFIG ) key to engage the
"CONFIG SETTING" mode, then use the key-
board's arrow keys to navigate to the needed
fields.
Please see the discussion below for details of the
"CONFIG SETTING" mode.
5. Press the [ 5/10 ]( RECORD ) key to register.
If you want to un-do the registration, press [ 6/
14 ]( UN-RECORD ) key.
Advice: If no special entry is performed, the log will
register you as "USER1."
Page 26
F
UNCTION
CONFIG S
on page 25, press the
FT 9000MP/C
DX ONTEST
ETTING
"U S
SER ELCT
"U E
SER
D M
ATA ANAGEMENT
" M
ODE
" M
DIT ODE
O M
PERATION ANUAL