Table of Contents
Advertisement
Simrad ES70-7C
Using self-locking taps
32
Jotun
Head office address: P.O.Box 2021, N-3248 Sandefjord, Norway
Website: www.jotun.com.
Racing
1
2
Non-stop
3
Safeguard Universal primer (125 micron) with Antifouling
SeaQuantum Ultra (125 micron)
4
Antifouling Seaguardian
International Marine Coatings
Address: World-wide offices
Wesite: www.international-marine.com.
1
Intersleek tie coat + 425 FCS
• BXA386/BXA390/BXA391 Grey
• HKA563/HKA570/HKA571 Yellow
• Mix BXA386, BXA390 and BXA391 first, then apply.
When dry, mix HKA563, HKA570 and HKA571, apply.
2
Intersmooth 360 Ecoloflex SPC
3
Micron Ekstra
Hempel IFA Coatings
Head office address: Hempel A/S, Lundtoftevej 150, Kgs.
Lyngby, DK-2800 Copenhagen, Denmark
Website: www.hempel.com.
Hempel A/F Classic 76550
1
Note
Refer to the manufacturer's documentation and data sheets for
a complete procedure.
Screw connections are generally made so that they can be
loosened again. However, accidental loosening, especially under
dynamic stress, must be avoided. For this reason it is often
necessary to use additional locking devices. These are often
expensive, they can be used once only, or react critically to
temperature changes.
Introduction to Emuge self-locking threads
is a tap design with an integrated locking feature.
Emuge self-lock
Standard metric bolts are used. The internal thread provides a
self-locking connection, which can be used repeatedly. It is not
307324/B
Advertisement
Table of Contents
