Table of Contents
Advertisement
Simrad ES38-12
Approved anti-fouling paints for transducers
This is Simrad's list of approved antifouling paints on polyurethane transducer housing.
Jotun
Head office address: P.O.Box 2021, N-3248 Sandefjord, Norway
Website: www.jotun.com.
1
Racing
2
Non-stop
Safeguard Universal primer (125 micron) with Antifouling SeaQuantum Ultra (125
3
micron)
4
Antifouling Seaguardian
International Marine Coatings
Address: World-wide offices
Website: www.international-marine.com.
1
Intersleek tie coat + 425 FCS
• BXA386/BXA390/BXA391 Grey
• HKA563/HKA570/HKA571 Yellow
• Mix BXA386, BXA390 and BXA391 first, then apply. When dry, mix HKA563,
HKA570 and HKA571, apply.
Intersmooth 360 Ecoloflex SPC
2
3
Micron Extra
Hempel IFA Coatings
Head office address: Hempel A/S, Lundtoftevej 150, Kgs. Lyngby, DK-2800
Copenhagen, Denmark
Website: www.hempel.com.
1
Hempel A/F Classic 76550
Note
Refer to the manufacturer's documentation and data sheets for a complete procedure.
Using self-locking taps
Screw connections are generally made so that they can be loosened again. However,
accidental loosening, especially under dynamic stress, must be avoided. For this reason
it is often necessary to use additional locking devices. These are often expensive, they
can be used once only, or react critically to temperature changes.
28
344276/A
Advertisement
Table of Contents
