When The Function Status Indicator Lights Up In Red - Ricoh Aficio MP 3500P Operating Instructions Manual

When the Machine Does Not Operate As Wanted
When the Function Status Indicator Lights
Up in Red
1
When the function status indicator lights up in red, press the corresponding
function key, and then refer to the following table.
Problem
Documents and reports
do not print out.
Documents and reports
do not print out.
An error has occurred.
The machine is unable to
connect to the network.
Reference
p.15 "Troubleshooting When Using the Copy Function"
p.15 "When a Message Is Displayed"
p.25 "Troubleshooting When Using the Facsimile Function"
p.27 "When a Message Is Displayed"
p.43 "Troubleshooting When Using the Printer Function"
p.46 "When a Message Is Displayed"
p.59 "Troubleshooting When Using the Scanner Function"
p.62 "When a Message Is Displayed"
"Network Settings", General Settings Guide
4
Cause
The paper output tray is
full.
There is no paper left.
The function whose indica-
tor is lit in red is defective.
A network error has oc-
curred.
Solution
Remove the prints from the tray.
Add more paper. See p.73 "Loading Pa-
per".
Record the code number shown in the
display and contact your service repre-
sentative. See "When a Message Is Dis-
played" of each chapter.
You can use other functions normally.
• Check the displayed message and
take an appropriate action. See
"When a Message Is Displayed" of
each chapter.
• Check that the machine is correctly
connected to the network, and that
the machine is correctly set. See
"Network Settings", General Set-
tings Guide.
• Contact the administrator.
• If the function status indicator is still
lit in red even after trying to solve
the problem as described here, con-
tact your service representative.