Ricoh Aficio MP 3500P Operating Instructions Manual page 42

Troubleshooting When Using the Facsimile Function
Message
Memory is full.
Cannot scan
more. Transmis-
sion will be
stopped.
Note
❒ If the "
Check whether there are any network problems.
pears, the machine is not correctly connected to the network or the settings of
the machine are not correct. If you do not need to connect to a network, you
3
can specify the setting so this message is not displayed, and then the {Facsim-
ile} key no longer lights. See "Parameter Settings", General Settings Guide. If
you reconnect the machine to the network, be sure to set "Display" with User
Parameters.
❒ If the paper tray runs out of paper, "
" appears on the display, asking you to add more paper. If there is paper
it].
left in the other trays, you can receive documents as usual, even if the mes-
sage appears on the display. You can turn this function on or off with "Param-
eter Setting". See "Parameter Settings", General Settings Guide.
Reference
"Connecting to the Ethernet Interface", General Settings Guide
"File Transfer", General Settings Guide
"IP-Fax Settings", General Settings Guide
"Parameter Settings", General Settings Guide
34
Cause
Memory became full during
Parallel Memory Transmission.
No paper. Load it. then press [Ex-
Solution
Check the pages that have not been
sent using the Communication Re-
sult Report, and then resend those
pages.
" message ap-