Removing Punch Waste
This section describes how to remove punch waste.
Note
❒ While "
Punch Receptacle Full
function.
A
Open the front cover of the 2 Tray finisher.
B
Pull out the punch waste box, and then remove punch waste.
C
Reinstall the punch waste box.
D
Close the front cover of the 2 Tray finisher.
"
Punch Receptacle Full
" is displayed, you cannot use the Punch
AHT011S
ZDSO020J
ZDSO030J
" disappears.
Removing Punch Waste
105
7