Sharp 3800M - B/W Laser - All-in-One Operation Manual page 95

4
Press the FAX START
key. Transmission will
begin.
Broadcasting using a Group key
If the fax machines to which you want to broadcast have all been
programmed into one Group key, you can perform the broadcasting
operation using the following simplified procedure. Refer to "Storing
Numbers Under Group Keys" in Chapter 6.
1
Place the original face
down and push it gently
into the original feeder
tray.
• Adjust the resolution and/
or contrast settings if
desired.
2
Press the appropriate
Group key. Transmission
will begin.
If the memory becomes
full while the original is
being scanned, "MEMORY
FULL" will appear in the
display.
• Press the FAX START
key to transmit the pages
that have been stored up
to that point in memory.
• Press the STOP key to
cancel the entire
transmission.
Note: In Reverse Sending mode, you must press the STOP key to cancel the
entire transmission when "MEMORY FULL" appears in the display.
SUK 08 USING FAX LEO.p65
HOW TO USE THE FAX FUNCTION
85
Special Functions
FAX START
Original face down
19
(example)
30/03/00, 17:24
8
85