Reverse Sending - Sharp 3800M - B/W Laser - All-in-One Operation Manual

Sending Originals

Reverse Sending

The SPF on this machine scans the original from the last page. For the machine
to send the originals starting from the first page, Reverse Sending is initially
set to "ON". This function works only when the original is sent from memory.
Note: In Reverse Sending mode, when you send a large number of originals
and the memory becomes full, the originals already stored will be
cancelled. In this kind of situation, it is recommended you send the
original directly.
Use the procedure below to turn the Reverse Sending function on or off.
Factory setting: 1 (ON)
Step Press these keys
1
FUNCTION
2
8
3
4
Note: If you are adding to a group of previously scanned originals (for example
for memory polling), keep the Reverse Sending setting the same as it
was for the previously scanned originals. If you change the setting, the
sending order of the originals will change during the transmission.
(According to the setting in effect for each scan.)
72
SUK 08 USING FAX LEO.p65
GHI
ABC
ABC
or
STOP STOP
HOW TO USE THE FAX FUNCTION
72
Comments
"OPTION SETTING" will
appear in the display.
"REVERSE SENDING"
will appear in the display.
Press 1 to turn the
function on, or 2 to turn it
off.
Press the STOP key twice
to exit.
28/03/00, 14:37