Initial Settings Of Operation Panel; Power On - Sharp 3800M - B/W Laser - All-in-One Operation Manual

1
Turn the power switch on the left side of the machine to the "ON" position. The
ready ( ) indicator will light up and other indicators which show the initial
1 settings of the operation panel will also light up to indicate the ready condition.
For the initial settings, see the "Initial settings of operation panel" described
below.
The machine will enter a power save mode once the set time has
elapsed without any copier operation after the last copy of a run is made
or power is turned on.
The settings of the power save modes can be modified. See page 27,
USER PROGRAMS.
The machine will return to the initial settings a preset amount of time
after the last copy is made. The preset amount of time (auto clear time)
can be changed. See page 27, USER PROGRAMS.

Initial settings of operation panel

The copier assumes the initial settings when the copier is turned on or a preset time
(auto clear time) elapses after the last copy is made.
14
SUK 01 INSTALLATION LEO.p65

Power on

INSTALLATION
14
"0" is displayed in the display.
30/03/00, 17:45