Operation Panel - Sharp 3800M - B/W Laser - All-in-One Operation Manual

1
1
Exposure mode selector key and
indicators
Use to sequentially select the exposure
modes: AUTO, MANUAL ( = ) or
PHOTO (
by a lit indicator. (p.20)
Light ( { ) and dark ( } ) keys and
exposure indicators
Use to adjust the MANUAL ( = ) or
PHOTO (
exposure level is shown by a lit indica-
tor. (p. 20)
Use to start and terminate user
program setting. (p. 27)
SPF indicator (
SPF misfeed indicator ( ) (p. 42)
Alarm indicators
w : Drum replacement required
indicator (p.31)
t : Misfeed indicator (p.35)
s : TD cartridge replacement required
indicator (p. 29)
Copy ratio selector key and copy
ratio indicators
Use to sequentially select preset
reduction/ enlargement copy ratios.
Selected copy ratio is shown by a lit
indicator. (p. 22)
Zoom indicator (p. 22)
Copy ratio display (%) key (p. 22)
Display
Displays the specified copy quantity,
zoom copy ratio, user program code,
and error code.
10
SUK 01 INSTALLATION LEO.p65

Operation panel

B
). Selected mode is shown
) exposure level. Selected
)
INSTALLATION
10
ON LINE indicator
Lights up when the machine is used as
a printer or scanner.
Power save indicator
Lights up when the copier is in a power
save mode. (p. 25, 27)
Zoom keys ( N , L )
Use to select any reduction or enlarge-
ment copy ratio from 50 to 200% in 1%
increments. (p. 22)
Copy quantity keys ( < , < )
• Use to select the desired copy
quantity (1 to 50). (p. 19)
• Use to make user program entries.
(p. 27)
Clear key ( > )
• Press to clear the display, or press
during a copy run to terminate
copying. (p. 19)
• Press and hold down during standby to
display the total number of copies
made to date. (p.41)
Print key and ready indicator (
• Copying is possible when the indicator
is on.
• Use to set a user program.
30/03/00, 17:45
)