Troubleshooting - Sharp 3800M - B/W Laser - All-in-One Operation Manual

9. TROUBLESHOOTING

Problem
Dialing cannot be done.
No transmission takes place.
Nothing is printed at the
receiving end.
A distorted image is received at
the other end.
The received original is faint.
Received images are distorted.
COPY SERVICE ERROR
FAX SERVICE ERROR (X)
Note: If your problem cannot be solved by carrying out the instructions in
the Check and Remedy column above, please contact your SHARP
dealer.
SUK 09 TROUBLE LEO.P65
Troubleshooting
Check and Remedy
Make sure that the telephone line is
properly connected to both the machine
and the wall jack.
Make sure that the receiving machine
has not run out of printing paper.
Make sure that the receiving machine is
G3 compatible. (This information should
be included in the machine's
originalation.)
Check the display for possible error
messages.
Make sure that the original you are
sending is fed into the machine in the
correct way.
Make sure that the receiving machine is
in working order.
Noise on the telephone line may
cause distortion. Try sending the original
again.
Make a copy of the original on the
machine. If the copy is also distorted,
the machine may have a problem.
Ask the other party to send higher
contrast originals. If the contrast is still
too low, make a copy with the machine
to check it.
Noise on the telephone line may cause
distortion. Have the sending party send
the original again.
The drum cartridge may need
replacement.
The copier will not function. Turn the
power switch off, remove the power cord
from the outlet, and contact your
SHARP dealer.
The fax will not function. Contact your
SHARP dealer.
TROUBLESHOOTING
97
97
30/03/00, 17:31
9