Sharp 3800M - B/W Laser - All-in-One Operation Manual page 100

Special Functions
To set a timer operation:
Step Press these keys
1
FUNCTION
2
3
4
5
8
6
ENTER
7
8
ENTER
9
RESOLUTION
10
ENTER
90
SUK 08 USING FAX LEO.p65
ENTER
or
ABC
DEF
(example)
ABC
ENTER
or
(example)
JKL
(example)
CONTRAST
(optional)
HOW TO USE THE FAX FUNCTION
90
Comments
"TIMER MODE" will appear in the
display.
Select SET. "TIMER COMM. #=1",
"TIMER COMM. #=2" or "TIMER
COMM. #=3" will appear in the
display.
Select "SEND MODE" or "POLLING
MODE".
Enter the time of the operation (2
digits for the hour and 2 digits for
the minute).
Enter the code for the day of the
operation. If the operation will be
performed within 24 hours, just
press the ENTER key.
"ENTER NUMBER" will appear in
the display.
Enter the fax number of the other
machine using one of the following
methods:
• Press a Rapid key.
• Enter a Speed Dial number
with the number keys.
"SET RESOLUTION & CONTRAST
THEN ENTER" will appear in the
display.
If this is a transmission operation,
adjust the resolution and/or contrast
if desired. (Otherwise, skip this step.)
"LOAD ORIGINAL(S)" will appear in
the display. If the original is already
loaded, no message will appear in
the display.
After loading the original, it is
scanned into memory. Then the
original can be sent at the time you
selected, or polling can be
performed.
28/03/00, 14:38