Maintaining Your Machine; Cleaning The Exposure Glass; Cleaning The Exposure Glass Cover; Cleaning The Adf Or Ardf - Ricoh 2020D - Aficio B/W Laser Copy Reference Manual

Maintaining Your Machine

If the exposure glass, exposure glass
cover, ADF belt, or ARDF belt is dirty,
copy clarity may be reduced. Clean
these parts if they are dirty.
❖ ❖ ❖ ❖ Cleaning the machine
Wipe the machine with a soft,
damp cloth. Then wipe it with a
dry cloth to remove the water.
Important
❒ Do not use chemical cleaner or or-
ganic solvents such as thinner or
benzene. If such substances get in-
side the machine or melt plastic
parts, a failure might occur.
❒ Do not clean parts other than those
explicitly specified in this manual.
Other parts should only be cleaned
by your service representative.

Cleaning the Exposure Glass

Cleaning the Exposure Glass
Cover

Cleaning the ADF or ARDF

ND1C0200
Maintaining Your Machine
TRSR140E
5
61