Selecting The Default Finishing Setting ("Output Priority" Parameter) - Konica Minolta bizhub 181 User Manual

6

Selecting the default Finishing setting ("OUTPUT PRIORITY" parameter)

1
Display the "COPY SETTING 2" menu.
– Refer to "Displaying the "COPY SETTING 2" menu" on page 6-68.
2
Press the [+] or [,] key until "OUTPUT PRIORITY" is selected, and then
press the [OK] key.
3
Press the [+] or [,] key until "NON-SORT", "SORT" or "GROUP" is se-
lected, and then press the [OK] key.
The "COPY SETTING 2" menu appears again.
6-70
Utility mode/Copy mode parameters
bizhub 181