Selecting An Output Setting; Automatic "Sort"/"Non-Sort" Setting Selection - Konica Minolta 8020 Basic Operations

5.2 Selecting an Output Setting

5.2 Selecting an Output Setting
Various settings for sorting and Output copies are available.
Tip
The Output settings can be used together with other functions. For details, refer
to the "Function Combination Table" in the Administrator Operations volume.
The following seven ways of Output are available.
G Non-sorting ("Non-Sort" setting)
G
Crisscross non-sorting ("Non-Sort" setting)
G
Sorting ("Sort" setting)
G
Crisscross sorting ("Sort" setting)
G Stapling (Corner Staple)
G
Stapling (2-Point Staple)
G Hole-punching
Note
Crisscross non-sorting and crisscross sorting are only available if the finisher is
not installed.

Automatic "Sort"/"Non-Sort" Setting Selection

When a document is loaded into the duplexing document feeder, the "Non-Sort"
setting is automatically selected if the document consists of only one page, and the
"Sort" setting is automatically selected if the document consists of 2 or more pages.
Whether or not the "Sort" or "Non-Sort" setting is automatically selected can be
specified using the "Intelligent Sorting" function on the User's Choice: 2 screen. For
more details, refer to "Specifying Default Settings ("User's Choice" Functions)" of
"Utility Mode Operations" in the Administrator Operations volume.
Konica 8020/8031
5
5-3