Copying Onto Non-Standard-Sized Paper - Konica Minolta bizhub 181 User Manual

4

Copying onto non-standard-sized paper

As an example, the following procedure describes how to make copies onto
non-standard-sized paper (9-13/16 inch (250 mm) × 7-1/16 inch (180 mm))
loaded into the manual bypass tray or the multi bypass tray.
Note
When loading non-standard-sized documents and paper, be sure to first
measure their sizes.
The document scales at the edges of the original glass are useful for
measuring documents and paper.
1
Position the document to be copied.
– Refer to "Loading the document" on page 3-18.
2
Adjust the paper guides in the bypass tray, and then load the paper into
the tray.
– Load the paper so that the side to be printed on faces down.
– Load the paper into the manual bypass tray one sheet at a time.
4-42
Making copies
bizhub 181