Konica Minolta bizhub 181 User Manual page 151

4
5
Press the [+] or [,] key or use the keypad to specify the zoom ratio for
the length (X), and then press the [OK] key.
– When specified using the [+] and [,] keys, the zoom ratio is set in
1% increments.
6
Press the [+] or [,] key or use the keypad to specify the zoom ratio for
the width (Y), and then press the [OK] key.
– When specified using the [+] and [,] keys, the zoom ratio is set in
1% increments.
7
Press the [Back] key.
The main screen appears again.
8
If necessary, specify any other copy settings.
– Refer to "Selecting the paper source" on page 4-12.
– Refer to "Before making copies" on page 3-2.
– Refer to "Advanced copy operations" on page 5-2.
9
Press the [Start] key.
Note
To correct the specified value, press the [Clear/Stop] key, and then spec-
ify the correct value.
4-58
Making copies
bizhub 181