Copying Onto Envelopes - Konica Minolta bizhub 181 User Manual

4

Copying onto envelopes

As an example, the following procedure describes how to make copies onto
7-7/8 inch (200 mm) × 5-7/8 inch (150 mm) envelopes loaded into the manual
bypass tray or the multi bypass tray.
Note
When loading non-standard-sized documents and paper, be sure to first
measure their sizes.
The document scales at the edges of the original glass are useful for
measuring documents and paper.
1
Position the document to be copied.
– Refer to "Loading the document" on page 3-18.
2
Adjust the paper guides in the bypass tray, and then load the enve-
lopes into the tray.
– Load the envelopes with the flap facing up so that the surface to be
printed on faces down, as shown in the illustration.
– Before loading envelopes, press them down to make sure that all
air is removed, and make sure that the folds of the flaps are firmly
pressed.
– Load envelopes into the manual bypass tray one at a time.
4-46
Making copies
bizhub 181