Utility mode/Copy mode parameters
Adjusting the margin width ("MARGIN SETTING" parameter)
1
Display the "COPY SETTING 1" menu.
–
Refer to "Displaying the "COPY SETTING 1" menu" on page 6-53.
2
Press the [+] or [,] key until "MARGIN SETTING" is selected, and then
press the [OK] key.
3
Use the keypad to type in margin width, and then press the [OK] key.
–
The binding width can be set between 0 inch (0 mm) and 13/16 inch
(20 mm).
–
To correct the entered number, press the [Clear/Stop] key, and then
use the keypad to type in the correct number.
The "COPY SETTING 1" menu appears again.
bizhub 181
6
6-63