Advertisement
Quick Links
1
2
4
Brackets must be configured for Passenger or Driver-Side as shown below:
1
AMP RESEARCH TECH SUPPORT 1-888-983-2204 (Press 2) Monday - Friday, 6:00 AM - 5:00 PM PST
BedStep2™ is invented, designed, engineeried and manufactured exclusively by AMP Research and may be covered by one of the following patents:
6,641,158; 6,830,257; 6,938,909; 7,055,839; 7,380,807; 7,398,985; 7,584,975. Made in USA © 2011 AMP Research
Three-year limited warranty. Professional installation is recommended.
www.amp-research.com
5
3
6
7
Driver-Side Orientation
APPLICATION
Ford Super Duty
F-250/350
(Fits all Beds /Cabs)
8
9
10
15
11
16
Passanger-Side Orientation
/3
AMP PART# 7543-0A
2017
12
Torque wrench
13
14
T25 Torx
17
13mm 15mm
IM7543 rev 04.7.7
3/8" Drill Bit
21mm
22mm
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for AMP Research BedStep2 75413-01A
Summary of Contents for AMP Research BedStep2 75413-01A
- Page 1 AMP RESEARCH TECH SUPPORT 1-888-983-2204 (Press 2) Monday - Friday, 6:00 AM - 5:00 PM PST BedStep2™ is invented, designed, engineeried and manufactured exclusively by AMP Research and may be covered by one of the following patents: 6,641,158; 6,830,257; 6,938,909; 7,055,839; 7,380,807; 7,398,985; 7,584,975. Made in USA © 2011 AMP Research Three-year limited warranty.
- Page 2 Assemble brackets as shown in next three steps. Note: Driver side shown. Rotate frame spacer 80° for passenger side. (See image in step 1 for passenger orientation). Torque bolts Torque bolts Do not to 20 ft-lbs. to 20 Ft Lbs. tighten bolts.
- Page 3 Install forward support bracket (#5) using supplied Torque both the Flange nut (#11) and bolt (#10) to M8 hardware (#8) bolts and (#9) nuts. Torque bolts 30 Ft Lbs. to 16Ft-Lbs. 13mm 21& 22mm Attach rearward support bracket (#6) using supplied Remove bracket and pre drill hole using a 1/8”...
Need help?
Do you have a question about the BedStep2 75413-01A and is the answer not in the manual?
Questions and answers