Expression Pedals Names; Programming The 2120 Foot Controller; Assigning Functions - DigiTech Artist 2120 User Manual

Section - 5 The 2120 FC
begin their power-up initialization sequences. When initialization is complete, the 2120 FC's display will show the number and
name of the currently selected program on the 2120 VGS.
4. To change programs within the currently selected Bank, press one of the numbered patch switches on the pedalboard. The
display will change to reflect the name and number of the newly selected Program.
5. The Expression pedal is set from the factory to control at least one parameter in almost every program in the 2120 VGS. Try it in
each new Program to find out what it does. •The 2120 VGS will automatically calibrate the 2120 FC when connection is made.
Expression Pedal Names
With the 2120 being able to accommodate up to 3 Expression pedals, the pedal names change if the 2120 FC is used. The Names are as follows:
Exp1 = Expression pedal input on the rear of 2120. When the 2120 FC is not connected
Exp1 = Expression pedal on 2120 FC(When the 2120 FC is connected)
Exp2 = External Expression pedal insert on 2120 FC(When the 2120 FC is connected)
Exp3 = Expression pedal insert on the rear panel of the 2120 (When the 2120 FC is Connected).
Programming the 2120 FC Foot Controller
All programming and setup for the 2120 FC is performed from the front panel of the 2120 VGS. Most of the setup menus that deal with the
2120 FC can be found in the Utility section of the 2120 VGS.

Assigning Functions

The 2120 FC foot controller helps you organize your sounds into 19 groups called Banks. Each of these Banks utilize the 10 footswitches
patches, which are user programmable to do one of several functions. These functions include:
• Selecting any 2120 VGS Program
• Modifying or turning On/Off any Parameter in real-time
• Sending MIDI CC information out of the MIDI out port (Toggle CC# for values 0 or 127)
• Assign a MIDI CC# for the Expression pedal to send out the MIDI port
• Selecting the next or previous Bank (Bank Up/Down)
To change Banks, Press either the Bank Up or Bank Down footswitches on the 2120 FC to take you up or down one bank at a time.
The Foot Controller setup menu contains all the setup options necessary to use the 2120 VGS with the DigiTech 2120 FC foot controller. The
submenus included under the Foot Controller setup are located on pages 10 and 11 of the utilities menu and they include:
50
2120 VGS Artist
User Guide