DigiTech Artist 2120 User Manual page 11

2120 VGS Artist
15) Utility Button - Exits current mode and enters Utilities mode.
16) Bypass Button - Bypasses the 2120 VGS Preamp and Effects
17-23) FX Library Buttons:
17) [PreAmp] - Exits current mode and enters FX edit mode at the Preamp module. Successive presses move to the next available module
in the PreAmp section.
18) [Mod] - Exits current mode, enters FX Edit mode and selects the first available modulation module of a program. Successive presses
move to the next available Modulation effect within the program. Pressing and holding this button automatically loads a Modulation
effect into the currently selected effect module.
19) [Pch] - Exits current mode, enters FX Edit mode and selects the first available PitchShift or Detune module of a program. Successive
presses move to the next available PitchShift or Detune module of a program. Pressing and holding this button automatically loads a
detune effect into the currently selected effect module.
20) [Dly/Rvb] - Exits current mode, enters FX Edit mode and selects the first available Delay or Reverb module of the program. Successive
presses move to the next available Delay or Reverb module of the program. Pressing and holding this button automatically loads a
Dly/Rvb effect into the currently selected program.
21) [Other] - Exits current mode, enters FX Edit mode and selects the effect configuration. Successive presses move to the next available
Digital effect module not included in the above selections until finally reaching the Master Mix module.
22) [TapIt] -The TapIt button is used to set the delay tap tempo for precise delay time taps. To use the TapIt button, simply tap the
<TapIt> button at the desired tempo and the delay time will automatically recalibrate itself.
23) [Tuner] - Exits current mode and enters Tuner mode.
24) Power Switch - Turns the unit on and off.
User Guide
Section -1 Introduction
5