Assigning Parameters To The Expression Pedals - DigiTech CONTROL 2 Owner's Manual

Using the Control 2 Remote Foot Controller
5. Turn the Edit/Select knob until <FC FSW> appears.
Press the Edit/Select knob. The Linking menu appears.
6.
7. Scroll down and highlight LINKED TO NO LINK. Press the Edit/Select
knob.
Turn the Edit/Select knob to select a parameter to assign to the
8.
CONTROL footswitch and press the Edit/Select knob.
Pressing the CONTROL footswitch now toggles between the selected
parameter's Min and Max values. The Min and Max values are automatically
updated with the selected parameter's defaults. You can also edit the Min and
Max values to customize the parameter range for your needs using the Edit/
Select knob.
Changes must be stored using the GSP's Store procedure. Consult your GSP
documentation for more information about storing changes to presets.

Assigning Parameters to the Expression Pedals

The Control 2 features two expression pedal controller options: the built-
in Expression Pedal and an optional expression controller which can be
connected to the rear panel of the Control 2. Assigning parameters to either
expression controller involves the same process. To assign a parameter to
either expression pedal controller, follow these steps:
1. From the Preset screen on the GSP, press the Edit/Select knob twice.
Turn the Edit/Select knob to highlight Expression Links and press the
2.
Edit/Select knob. The Edit Expression Links menu appears.
3. Scroll down and highlight an expression link that is not in use (NO CTRL
NO LINK). Press the Edit/Select knob to select the expression link.
The Linking menu appears.
Make sure Assign Controller is highlighted and press the Edit/Select
4.
knob.
5. To assign a parameter to be controlled by the Control 2's built-in
Expression Pedal, turn the Edit/Select knob until <FC PDL1> appears.
6. To assign a parameter to be controlled by the Control 2's optional rear
panel expression pedal, turn the Edit/Select knob until <FC PDL2>
appears.
7. Press the Edit/Select knob. The Linking menu appears.
Scroll down and highlight LINKED TO NO LINK. Press the Edit/Select
8.
knob.
9. Turn the Edit/Select knob to select a parameter to assign to the
Expression Pedal and press the Edit/Select knob.
2
Control 2 Owner's Manual