Other Utility Functions; Factory Reset - DigiTech Artist 2120 User Manual

Valve guitar system programmable dual tube preamp/processor and foot controller
Hide thumbs Also See for Artist 2120:
Table of Contents

Advertisement

Section - 6 Advanced Topics

Other Utility Functions

These are the extra Utility functions included in the 2120 VGS that make your programming life a little easier.

Factory Reset

Allows you to erase all User Program, Default and Utility settings at once and restore the 2120 VGS memory to its factory condition.
WARNING! This procedure will destroy and reset ALL User programs in the 2120 VGS memory. Be sure you want to erase the
memory, and start fresh before continuing with this procedure.
To perform a factory reset, do the following:
1. Press the <Utilities> button and scroll to page 13 of the Utility Menu using the <Page> knob. The display reads:
2. To initiate the reset, turn the <1> knob.
3. This is your last chance to change your mind. If you are sure, turn the <3> knob. If not, you can abort the procedure by turning
the <4> knob. If you turn the <3> knob, the Information line of the display briefly reads:
after which the unit resets, and returns to Program 1.
In extreme situations, the 2120 VGS can be reset using a special power-up procedure. This will also completely reset the 2120, eliminating any
custom settings created by the user. The procedure is as follows:
1. Press and hold the <Preamp> button while powering up your 2120 VGS.
2. Release the <Preamp> parameter button after an asterisk appears in the information line on the screen.
3. Press the <Mod> button and the 2120 VGS will re-initialize itself.
Global vs. Local Cabinet Emulation
The thing to factor in when using the Cabinet emulator in either global or local mode is whether or not you want all of your sounds affected by
this change. A good time to use Global mode is when your frequently playing in different venues (because each room always sounds different).
1. Press <Utilities> and scroll to page 2 of the Utility page using the <Page> knob. The display reads:
66
2
Factory Reset ?
%kHz
%kHz
Yes
1
2
msdB
msdB
LINK
CHANGED
LINK
CHANGED
COMP
WAH
TUBE
FACTORY
USER
BANK
13
13
PAGE
OF
FACTORY RESETTING...
%kHz
3
4
msdB
LINK
CHANGED
LINK
CHANGED
EQ
GATE
L/R OUTS
L/R OUTS
2120 VGS Artist
User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents