Rotary Speaker Simulator - DigiTech Artist 2120 User Manual

2120 VGS Artist
FX: Lvl Controls the signal input level fed to the module. Ranges from Off to 100%.
Controls the level of the dry (uneffected) signal. Ranges from Off to 100%.
Dry: Lvl
Balance Controls the positioning of the dry signal in the stereo soundfield. Ranges from -99 (all left) to 99 (all right).
Speed Controls the Low Frequency Oscillator (LFO) speed of the phaser. Ranges from 0.06 to 16.0 Hz.
Depth Controls the intensity of the phaser effect. High settings of DEPTH combined with high settings of FDBCK
produce dramatic, synth-like textures. Ranges from 0 to 30 milliseconds.
FdBck Controls how much of the flanged signal is fed back to the input of the module. The FDBACK parameter is what
gives phasers their distinctive resonating sound. Ranges from -99% to 99%.
WvFrm Selects which waveform the LFO follows. Options for this control include sine, triangle, SP1 (Special 1), and SP2
(Special 2). The sine wave setting is probably the most easily recognized, but the smooth response of the
triangle wave or the intensity of SP1 or SP2 typically produce better results. See figure 4-2.
Out A - B Adjusts the overall level of phaser voice A or B. Ranges from Off to 100%.
Pan A - B Controls the stereo soundfield placement of phaser voice A or B. Ranges from -99 to 99.
Out L - R Controls the output level of the left or right side of the flanger. Ranges from Off to 100%.

Rotary Speaker Simulator

The Rotary Speaker Simulator allows you to emulate the classic rotating speaker sound, without the chiropractic problems that come with
moving bulky speaker cabinets. The Rotary speaker is directly responsible for some of the most unique sounds in music. The applications for
this effect are so diverse, it can be used to achieve sounds ranging from the Allman Brothers Band to the legendary Stevie Ray Vaughan.
Rotary Speaker Simulator Parameters:
Controls the signal input level fed to the module. Ranges from Off to 100%.
FX: Lvl
Dry: Lvl Controls the level of the dry (uneffected) signal. Ranges from Off to 100%.
Balance Controls the positioning of the dry signal in the stereo soundfield. Ranges from -99 (all left) to 99 (all right)
Mode Selects which speed mode the Rotor and Horn are in. Settings are fast or slow.
Spread Sets the horn stereo microphone spread. Ranges from 0 to 100%.
Sets the overall level of the Rotor or Horn. Ranges from Off to 100%.
H - R: Level
Slo - Fast Hrn Speed Controls the Low Frequency Oscillator (LFO) speed of the Horn. Ranges from 0.06 to 16.0 Hz.
Slo - Fast Hrn Depth Controls the intensity of the rotating effect. Ranges from 0 to 30 milliseconds.
Slo - Fast Hrn Doppler Sets the amount of shifted pitch heard in the Horn. Ranges from 0 to 50 milliseconds.
Slo - Fast Rtr Speed Controls the Low Frequency Oscillator (LFO) speed of the Rotor. Ranges from 0.06 to 16.0 Hz.
Slo - Fast Rtr Depth Controls the intensity of the rotating effect. Ranges from 0 to 30 milliseconds.
X-Over Selects the frequency where the signal is split between the Horn and Rotor. Ranges from 25Hz to 20kHz.
User Guide
Section - 4 Effects and Parameters
39