Cree Connected BA19-08027OMF-12CE26-1C100 How To Reset

Cree Connected® LED Bulb: How to Reset
If you have successfully set up your compatible hub, but cannot get a Connected Cree®
LED bulb to pair with the hub in the applicable app, you can factory reset your bulbs.
Step 1
Install your bulb in a light fixture and turn it on. (For best results we recommend
installing the bulb where you can turn the power off at a wall switch.)
Step 2
Turn the light switch on at one second and off at two second intervals (1second on : 2
seconds off) until the light blinks once to indicate it has reset. This should happen at the
4th full on-off cycle.
Step 3
Turn the light off and pair the bulb with your hub via the mobile App.
If you need additional assistance, you may contact Cree Customer Service (1-866-924-
3645)